Service Details

Your Cart

Your cart is empty
Back to Services

Service Details & Pricing

Complete pricing for all aircon types, HP ranges, and what's included in every service.

Installation

Professional installation of new aircon units for homes and businesses.

Aircon TypeHP / CapacityPrice
Wall Mounted0.8 – 1.5 HP₱7,500
Wall Mounted2 – 2.5 HP₱8,500
Wall Mounted3 – 4 HP₱10,500
Window Type (Non-Inverter)≤ 1.5 HP₱3,500
Window Type (Non-Inverter)2 – 2.5 HP₱4,500
Window Type (Non-Inverter)3+ HP₱5,500
Window Type (Inverter)≤ 1.5 HP₱3,500
Window Type (Inverter)2 – 2.5 HP₱4,500
Window Type (Inverter)3+ HP₱5,500
Ceiling Types (Cassette / Suspended / Concealed)2TR – 3TR₱18,000
Ceiling Types (Cassette / Suspended / Concealed)4TR – 5TR₱22,500
Chilled Water100K – 125K₱100,000Max 6m. Requires ocular & approved mechanical plan
VRV / VRFVariesRequires QuoteOcular & approved mechanical plan required

Service Includes

  • Standard wall/bracket mounting
  • Copper piping (up to 10ft included)
  • Electrical wiring and connection
  • Vacuum and pressure testing
  • System start-up and performance check
  • Basic drain line routing

Important Notes

Inclusion:
  • Minimum 1st 10 feet copper tube (0.28)
  • Rubber insulation ¾ thickness
  • 10 feet Communication wire (2.0mm in ½ orange flexible hose)
  • Basic outdoor unit support bracket
  • Outdoor service breaker/Nema 3R
  • 1 length PVC blue pipe for drain line
  • Start up and commissioning
Not Included:
  1. Main Power supply (feeder line) from main panel board to outdoor service breaker.
  2. Civil works, carpentry and masonry and chipping works to embed to refrigerant pipe and drain line.
  3. Main PVC Drain line / Stab-out.
  4. Fabrication of special outdoor unit support bracket and deflector duct if needed.
  5. Relocation of unit if the client decides to change the location of installed unit.
  6. Restoration of affected area after chipping works.
  7. As Built Mechanical Plan and any kind of permits, bonds and insurance as may be required by the above scope.
  8. Any other works not mentioned.
  9. Client provide us a temporary stock room, free of charge for water and electricity.
Scope of Work:
  1. Site Inspection and Preparation — To ensure proper placement, safety, and efficient system operation.
    • Inspect installation area.
    • Measure space and determine the best location for indoor and outdoor units.
    • Prepare mounting surfaces and electrical supply.
  2. Installation of Indoor Unit (Evaporator) — To allow proper air distribution and prevent vibration or water leakage.
    • Mount the indoor unit on the wall or ceiling bracket.
    • Ensure the unit is level and securely fixed.
  3. Installation of Outdoor Unit (Condenser) — To allow proper heat dissipation and protect the unit from damage.
    • Install the condenser unit on a concrete pad, bracket, or stand.
    • Ensure proper spacing for ventilation.
  4. Refrigerant Piping Installation — To allow refrigerant to circulate efficiently while preventing energy loss.
    • Install copper pipes connecting indoor and outdoor units.
    • Apply rubber insulation to the pipes.
  5. Drainage System Installation — To remove condensed water and prevent leaks inside the room.
    • Install drain hose or pipe from the indoor unit.
    • Ensure proper slope for water discharge.
  6. Electrical Wiring Connection — To provide safe and reliable power to the system.
    • Connect power supply and communication wiring between units.
    • Install circuit breaker and electrical protection.
  7. System Vacuuming — To prevent contamination and ensure proper refrigerant flow.
    • Use a vacuum pump to remove air and moisture from the refrigerant lines.
  8. Refrigerant Charging — To ensure proper cooling performance.
    • Charge the system with the correct refrigerant if required.
  9. System Testing and Commissioning — To confirm the air conditioning unit operates safely and efficiently.
    • Start the system and check temperature, pressure, and airflow.
    • Inspect for leaks, unusual noise, or electrical issues.
  10. Final Inspection and Handover — To ensure the system is ready for use and the client understands its operation.
    • Clean the installation area.
    • Provide operational instructions to the client.
Book Installation

Cleaning

Deep cleaning service to maintain optimal aircon performance and air quality.

Aircon TypePrice per Unit
Window Type (Non-Inverter)₱799
Window Type (Inverter)₱850
Wall Mounted₱1,599
Floor Mounted₱2,500
Ceiling Cassette₱2,800
Ceiling Suspended₱2,800
Ceiling Concealed (Ducted)₱3,500
Chilled Water / Any Type₱4,500

Service Includes

  • Thorough washing of the unit
  • Condenser and filter cleaning
  • Cooling coils and fan inspection
  • Drain line flushing
  • Unit performance check after cleaning

Important Notes

  • Discounted prices may apply depending on the quantity of units.
  • Multi-split systems are priced per indoor unit.
  • +₱300 for units located above 10ft.
  • Materials, repairs, room permits & parking fees are not included.
  • Heavy-duty / chemical cleaning is charged separately if needed.
Book Cleaning

Dismantle

Professional dismantling service for unit removal and relocation.

Aircon TypePrice
Window Type₱500
Wall Mounted₱1,800
Ceiling Concealed₱5,500Ducting not included
Chilled Water₱15,000
Floor Mounted₱2,500
Ceiling Cassette₱2,500
Ceiling Suspended₱2,500

Service Includes

  • Safe removal of indoor and outdoor units
  • Proper refrigerant recovery
  • Disconnection of piping and electrical
  • Capping of drain and pipe openings

Important Notes

  • Ceiling Concealed price does not include ducting removal.
  • Relocation service (dismantle + reinstall) is quoted separately.
  • Wall patching or restoration of affected areas is not included.
Book Dismantle

System Reprocess / Recharging of Refrigerant

Refrigerant recharge and system recalibration for optimal cooling efficiency.

Aircon TypeHP / CapacityPrice
Wall Mounted Type
Window Type (Non-Inverter)—₱5,000
Window Type (Inverter)—₱5,000
Wall Mounted≤ 1.5 HP: ₱6,500 | 2–2.5 HP: ₱7,500 | 3+ HP: ₱8,500₱6,500 – ₱8,500
Floor Mounted—₱10,000
Ceiling Cassette—₱12,500
Ceiling Suspended—₱12,500
Ceiling Ducted—₱15,500
VRF / VRV
Outdoor Unit—₱25,000
Indoor – Wall Mounted—₱5,500
Indoor – Floor Mounted—₱5,500
Indoor – Ceiling Cassette—₱5,500
Indoor – Ceiling Suspended—₱5,500
Indoor – Ceiling Ducted—₱5,500

Service Includes

  • Complete refrigerant recovery
  • System nitrogen flushing
  • Leak testing and pressure test
  • Refrigerant recharge (R-32 or R-410A)
  • Performance check after reprocess

Important Notes

AC system reprocessing is to clean, repair, and restore the air-conditioning system so it operates efficiently, safely, and with proper cooling performance.

Scope of Work:
  1. System Inspection — To identify problems before performing repairs. Prevent further damage to the system.
    • Check compressor, condenser, evaporator, piping, and electrical connections.
    • Inspect for leaks, corrosion, and damaged parts.
  2. Cleaning of Components — Improve airflow and heat transfer. Increase cooling efficiency and reduce energy consumption.
    • Clean evaporator coil, condenser coil, and air filters.
    • Remove dust, dirt, and debris.
  3. Refrigerant Recovery — Prevent refrigerant release to the environment. Prepare the system for repair or recharging.
    • Remove existing refrigerant from the system using recovery equipment.
  4. Leak Testing and Repair — Prevent refrigerant loss. Maintain proper cooling performance.
    • Pressure test the system with nitrogen.
    • Locate and repair leaks in pipes or joints.
  5. System Flushing (if necessary) — Remove contaminants, burnt oil, or moisture inside the system.
    • Flush the pipes and components with a cleaning agent.
  6. System Vacuuming — Prevent acid formation and freezing. Ensure proper refrigerant circulation.
    • Use a vacuum pump to remove air and moisture from the system.
  7. Refrigerant Charging — Restore proper cooling capacity.
    • Recharge the system with the correct type and amount of refrigerant using refrigerant digital charging scale.
  8. System Testing and Commissioning — Confirm the system operates safely and efficiently.
    • Test Run the AC system and check pressure, temperature, and airflow.
Book System Reprocess

Repair

Fast and reliable repair services for all aircon issues and malfunctions.

TECHNICIAN REPORT REQUIRED BEFORE QUOTATION

Repair fees can only be quoted after a technician troubleshoots the problem on-site. Parts and materials are charged separately at market price.

Common repairs: capacitor, fan motor, compressor, PCB board, thermistor.

Service Includes

  • On-site troubleshooting and diagnosis
  • Component-level repair
  • Post-repair testing and validation
  • Service warranty on repaired parts

Important Notes

  • Repair fees can only be quoted after a technician troubleshoots the problem.
  • Parts and materials are charged separately at market price.
  • Common repairs: capacitor, fan motor, compressor, PCB board, thermistor.
Book Repair Service

Check Up

Comprehensive aircon diagnostic and inspection to ensure peak performance.

Aircon TypePrice
Wall Mounted Type
Window Type (Non-Inverter)₱500
Window Type (Inverter)₱500
Wall Mounted₱500
Floor Mounted₱1,200
Ceiling Cassette₱1,200
Ceiling Suspended₱1,200
Ceiling Ducted₱2,500
Chilled Water
Any Type of Unit₱2,000
VRF / VRV
Outdoor Unit₱2,500
Indoor – Wall Mounted₱1,200
Indoor – Floor Mounted₱1,500
Indoor – Ceiling Cassette₱1,500
Indoor – Ceiling Suspended₱1,500
Indoor – Ceiling Ducted₱1,500

Service Includes

  • Full system diagnostic and inspection
  • Refrigerant level check
  • Electrical connections inspection
  • Thermostat calibration check
  • Performance assessment report

Important Notes

  • Check-up fee is waived if a repair or reprocess service is booked.
  • Any required parts or repairs will be quoted separately.
  • Recommended at least once a year for optimal unit performance.
Book Check Up